Frame
Stay tuned for more updates!
Wethepeople 2017 Message Frame @ $420
When Developing The Message Frame, We Tried To Address Many Of The Issues That Traditional Park Frames Suffer From. The Feedback We Had From Several Pro-Level Park Riders, Was That The Chainstays On Their Frames Tend To Twist After Heavy Side Impacts And Landings. To Combat This, We Beefed Up The Chain And Seat Stays Resulting In A Much Stiffer, Stronger Frame, Without Sacrificing Responsiveness.
- Tubing: Butted, Seamless 4130 Chromoly Tubing Japanese
- Toptube: 20.3″Or 20.6″ Tt
- Chainstay Length: 13″ Slammed, 13.2″ Centered
- Angles: Ht: 75.5 °, St: 71 °
- Bottom Bracket: Mid-Bb Width: 74Mm, Height: 11.5 “, Cnc Machined And Heat-Treated
- Headtube: Drilled For Gyro Tabs, Cnc Machined And Heat-Treated, Integ. H / Set
- Dropouts: 6Mm Thick Laser Cut And Heat-Treated, Removable Chain Tensioners
- Special Features: Super Strong, Technical Park Frame/Wider Rear Triangle Allows Clearance For A 2.4″ Tire/Extruded Top Tube With Integrated Threads For Cable Guides/Slim Profile Integrated Seat Clamp/Frame Comes With Removable Brake Mounts, But Brake Hardware Is Not Included
- Colors: Glossy Black, Spectral Silver
- Weight: 2.295Kg – 5.08Lbs (20.6″)
Wethepeople 2017 Battleship Frame @ $420
Fresh Off The Blocks For 2017 Is The All-New Battleship Frame. Combining Cutting Edge Hydroforming Technology With Input From Team Riders Dan Kruk And Jordan Godwin, The Battleship Is The Perfect Match For The Progressive Street Rider. Boasting An Incredibly Short 12.7″ Chainstay, Thicker Cnc Machined Dropouts (Designed To Work Flawlessly With Hub-Guards And Pegs), And A Fully Brakeless Design; The Battleship Is A Super Tough, No-Nonsense Street Weapon With Our Most Responsive Geometry Yet.
- Tubing: Butted, Seamless 4130 Chromoly Tubing Japanese
- Toptube: 20.5″, 20.75 “
- Chainstay Length: 12.7″ Slammed, 13″ Centered
- Angles: Ht: 75.5 °, St: 71 °
- Bottom Bracket: Mid-Bb Width: 74Mm, Height: 11.7 “, Cnc Machined And Heat-Treated
- Headtube: Taller 127Mm Height, Cnc Machined And Heat-Treated, Integ. H / Set
- Dropouts: 6Mm Thick Laser Cut And Heat-Treated, New Shape For Perfect Hubguard/Peg Fit Even When Slammed
- Special Features: Hydroformed Top And Down Tube For The Strongest Possible Connection To The Headtube/Super Strong, Technical Street Frame With The Shortest Chainstay Possible/Taller 127Mm Extended Headtube For Less Spacers With An Uncut Fork/Wider Rear Triangle Allows Clearance For A 2.5″ Tire/Fully Brakeless Frame/Slim Profile Integrated Seat Clamp
- Colors: Matt Black
- Weight: 2.325Kg – 5.125Lbs (20.5″)
Wethepeople 2017 Buck Frame (Dillon Lloyd Signature) @ $420
The Buck Frame Uses A Taller 127Mm Head Tube, Allowing You To Run A Taller Bar Position With An Uncut Fork Steerer, Without Having To Run Lots Of Ugly Spacers. Dillon Wanted A Steeper 75.5 Degree Head Tube Angle, A Shorter 13.35” (Slammed) Chainstay And A Taller 11.8” Bottom Bracket To Give Him Extra Clearance On Crooked Grinds. The Buck’S Secret Weapon Is The Super Tough 7Mm Thick Invest Cast Dropouts Which Are Designed To Run Seamlessly Into The Frame And Flush With Plastic Pegs And Hub Guards For The Perfect Fit. If You’Re Looking For A Sturdy Vessel To Get Wild On, The Buck Is The One For You.
- Tubing: Butted, Seamless 4130 Chromoly Tubing Japanese
- Toptube: 20.5″
- Chainstay Length: 13.5″ With 25-9 Gearing, 13.35″ Slammed
- Angles: Ht: 75.5 °, St: 71 °
- Bottom Bracket: Mid-Bb Width: 74Mm, Height: 11.8 “, Cnc Machined And Heat-Treated
- Headtube: Taller 127Mm Height, Cnc Machined And Heat-Treated, Integ. H / Set, Drilled For Gyro Tabs
- Dropouts: 7Mm Thick Investment Cast And Heat-Treated
- Special Features: Ovalised Dent Resistant Chain Stays/Taller 127Mm Extended Headtube For Less Spacers With An Uncut Fork/Wider Rear Triangle Allows Clearance For A 2.5″ Tire/Extruded Top Tube With Integrated Threads For Cable Guides/Frame Comes Drilled For Removable Brake Mounts, But Brake Hardware Is Not Included/Slim Profile Integrated Seat Clamp/Top And Down Tube Gussets
- Colors: Matt Black, Trans Honey Gold
- Weight: 2.4Kg – 5.4Lbs (21″
Stranger Ballast Frame @ $420
The Stranger ballast frame is made from heat-treated 4130 chromoly and features an integrated headtube drilled for gyro tabs, top and downtube gussets, mid BB shell, integrated seat post clamp, extra wide rear end for additional tire clearance, removable brake mounts, 8mm thick investment cast dropouts and built-in chain tensioners.
- Top Tubes: 20.5″, or 20.75″
- Integrated headtube drilled for gyro tabs
- Top and downtube gussets
- Extra wide rear end for additional tire clearance
- Seatstay located removable U-brake mounts
- 7mm thick investment cast dropouts
- Head Tube Angle: 75.5°
- Seat Tube Angle: 70°
- Seat Tube Height: 9.0″
- Chainstay Length: 13.25″
- BB Height: 11.5″, mid size bb
- Weight: 2350g
- Colour: Black
Stranger Sean Ricany Frame @ $420
The Stranger Ricany ballast frame is Sean Ricany’s signature model made from heat-treated 4130 chromoly and features an integrated headtube drilled for gyro tabs, top and downtube gussets, mid BB shell, integrated seat post clamp, extra wide rear end for additional tire clearance, removable brake mounts, 8mm thick investment cast dropouts and built-in chain tensioners.
- Top Tubes: 20.75″, or 21″
- Sean Ricany’s signature frame
- Integrated headtube drilled for gyro tabs
- Top and downtube gussets
- Extra wide rear end for additional tire clearance
- Seatstay located removable U-brake mounts
- 7mm thick investment cast dropouts
- Head Tube Angle: 75.5°
- Seat Tube Angle: 70°
- Seat Tube Height: 9.0″
- Chainstay Length: 13.25″
- BB Height: 11.5″, mid size bb
- Weight: 2350g
- Colour: Trans Black
Stranger Quan Frame @ $420
The Stranger Quan ballast frame is Caleb Quanbeck’s signature model made from heat-treated 4130 chromoly and features an extra tall integrated headtube with top and downtube gussets to increase front end strength, removable gyro tabs, mid BB shell, integrated seat post clamp, an extra wide rear end for additional tire clearance, seatstay located removable U-brake mounts, and 7mm thick investment cast dropouts with integrated chain tensioners.
- Top Tubes: 20.6″
- Caleb Quanbeck’s signature frame
- Extra tall integrated headtube to increase front end strength
- Top and downtube gussets
- Extra wide rear end for additional tire clearance
- Seatstay located removable U-brake mounts
- Integrated chain tensioners
- Head Tube Angle: 75.5°
- Seat Tube Angle: 70°
- Seat Tube Height: 10.0″
- Chainstay Length: 13.25″
- BB Height: 11.5″, mid size bb
- Weight: 2350g
- Colour: Raw
Fit Brandon Begin Frame @ $420
The Fit Begin scumbag frame is Brandon Begin’s signature model made from 4130 chromoly tubing with no brake mounts for a clean look, integrated headtube with engraved headtube badge, butted toptube and straight gauge downtube with external gussets, mid BB shell, integrated seat post clamp, tapered and swaged rear stays with large tire clearance, and 5mm thick heat-treated dropouts.
- Top Tubes: 20.75″
- Tapered/swaged seat and chain stays
- Butted top tube
- Straight gauge down tube
- 2.4” tire clearance
- Engraved head tube
- No brake mounts
- Head Tube Angle: 75.3°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.8″
- Chainstay Length: 13.2″ – 13.4″
- BB Height: 11.8″, mid size bb
- Weight: 2300g
- Colour: Black
Cult Hawk V2 Frame @ $400
The Cult hawk V2 frame is Chase Hawk’s signature model made from a chromoly blended Cult classic tubeset featuring a heat-treated integrated headtube, Cult logo toptube gusset and downtube gusset for increased strength, heat-treated mid BB shell, integrated seat post clamp, vintage style s-bend seatstays for maximum tire clearance, seatstay mounted removable u-brake mounts, and 5mm thick heat-treated dropouts.
- Top Tubes: 20.5″, or 20.75″
- Vintage style s-bend chainstay & seatstay
- Tapered top tube / S-bend chainstay
- External HT & DT gussets
- Removable brake mounts
- Heat treated dropouts for extra strength
- Wide rear triangle for increased tyre clearance
- Head Tube Angle: 75°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.85″
- Chainstay Length: 13.5″ (Slammed)
- BB Height: 11.7″, mid size bb
- Weight: 2220g
- Colour: Black
Cult Butter V2 Frame @ $400
The Cult butter V2 frame is Chase Dehart’s updated signature model made from “butter blended” chromoly tubing with slightly revised geometry to best fit Chase’s riding style. The butter V2 frame features an integrated headtube, “liberty bell” toptube gusset, downtube gusset, heat-treated mid BB shell, integrated seat post clamp, tapered seatstays with removable u-brake mounts, investment cast seatstay bridge, S-bend chainstays with room for large tire sizes and 5mm thick heat-treated dropouts.
- Top Tubes: 20.65″
- Butter blended chromoly tubing
- Tapered top tube / S-bend chainstay
- Liberty bell toptube gusset, and down tube gusset
- Butted seat tube with integrated seat clamp
- Removable brake mounts
- Investment cast seat stay bridge
- Wide rear triangle for increased tyre clearance
- Head Tube Angle: 75°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.55″
- Chainstay Length: 13.45″ (Slammed)
- BB Height: 11.8″, mid size bb
- Weight: 2250g
- Colour: Black
Cult Shorty OS Frame @ $400
The Cult SOS frame is made from a chromoly blended Cult classic tubeset with more responsive geometry to best suit today’s technical street and park riders. The SOS frame features an integrated headtube with dual gussets for strength, heat-treated mid BB shell, integrated seat post clamp, tapered seatstays with removable u-brake mounts, s-bend chainstays, curved bridges for increased tire clearance and 5mm thick heat-treated dropouts.
- Top Tubes: 20.5″, or 20.75″
- Responsive geometry to suit technical street and park riders
- Cult classic chromoly tubing
- Tapered top tube / S-bend chainstay
- External HT & DT gussets
- New style integrated seat clamp
- Removable brake mounts
- Heat treated dropouts for extra strength
- Wide rear triangle for increased tyre clearance
- Head Tube Angle: 75.5°
- Seat Tube Angle: 70°
- Seat Tube Height: 8.65″
- Chainstay Length: 13″ (Slammed)
- BB Height: 11.7″, mid size bb
- Weight: 2220g
- Colour: Black
Cult AK Frame @ $400
The Cult AK frame is Alex Kennedy’s signature model made from a 4130 chromoly tubeset for maximum strength, featuring a tapered toptube with Cult logo gusset, downtube gusset, integrated headtube, externally machined mid BB shell, integrated seat post clamp, tapered seatstays with removable u-brake mounts, s-bend chainstays with room for larger tire sizes, curved stay bridges and 5mm thick heat-treated dropouts.
- Top Tubes: 20.5″, or 20.75″
- Cult classic chromoly tubing
- Tapered top tube / S-bend chainstay
- External HT & DT gussets
- New style integrated seat clamp
- Removable brake mounts
- Heat treated dropouts for extra strength
- Wide rear triangle for increased tyre clearance
- Head Tube Angle: 75°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.65″
- Chainstay Length: 13.55″ (Slammed)
- BB Height: 11.8″, mid size bb
- Weight: 2220g
- Colour: Black (20.75″), or Indigo (20.5″, or 20.75″)
Fiend Embryo Frame @ $390
The Fiend embryo frame is constructed from full 4130 true temper chromoly tubing and features heat-treated integrated headtube drilled for gyro tabs, gusseted downtube, heat-treated BB shell, externally butted seattube with integrated seatpost clamp, double bend chainstays with room for large tire sizes, tapered seatstays with removable u-brake mounts, and 5mm thick dropouts.
- Top Tubes: 20.5″, 20.75″, or 21.0″
- Full 4130 true temper chromoly tubing
- Gussetted head tube/down tube junction
- Tapered seat stays
- Heat-treated mid BB shell
- Integrated headset head tube (Drilled for detangler tabs)
- Removable cable stop and seat stay brake mounts
- Integrated post clamp
- Minimal 5mm thick dropouts with 14mm slots
- Head Tube Angle: 75°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.5″ (20.5″, or 20.75″), or 9.0″ (21.0″)
- Chainstay Length: 13.375″ (Slammed)
- BB Height: 11.625″, mid size bb
- Weight: 2180g
- Colour: Black (20.5″, 20.75″, or 21.0″), Red (20.5″, or 20.75″), or Green (20.5″)
Fiend Morrow Frame @ $420
The Fiend morrow frame is Ty Morrow’s signature model constructed from 4130 chromoly tubing, featuring an integrated headtube drilled for gyro tabs, ovalized dent resistant downtube with investment cast gusset, toptube trip logo cast gusset, externally machined BB shell, integrated seat clamp, tapered seatstays with removable u-brake mounts, investment cast Fiend seatstay bridge, ovalized chainstays for dent resistance and 5mm thick dropouts flattened on the inside for better hub guard clearance.
- Top Tubes: 20.5″, or 20.75″
- Full 4130 true temper chromoly construction
- Custom head tube with removable detangler tabs
- Removable seat stay brake mounts and cable guide
- Ovalized dent resistant downtube with investment cast gusset
- Toptube trip logo cast gusset
- Externally machined BB shell
- Integrated post clamp
- Investment cast Fiend seatstay bridge
- 5mm thick dropouts flattened for better hub guard clearance
- Head Tube Angle: 75°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.75″
- Chainstay Length: 13.71″ (Slammed)
- BB Height: 11.8″, mid size bb
- Weight: 2120g
- Colour: Black
Sunday Funday 2.1 Frame @ $550
The Sunday Aaron Ross funday 2.1 frame uses nearly all of Sunday’s aftermarket frame features including hollow dropouts, integrated chain tensioners, wave down tube, angled removable brake mounts, director style wishbone, post-weld machining of the BB, and headtube and full 41 thermal heat-treating backed by a lifetime warranty. It continues on with the geometry specified by Aaron Ross himself.
- 41thermal lifetime warranty
- Top Tubes: 20.75″
- Double-butted 1.45″ diameter downtube with proven wave shaping to fight denting
- Angled removable vanishing point brake mounts with ultra-durable, internally reinforced bosses
- Hollow 8mm wide dropouts over solid 5mm dropout, but over twice as strong
- Small internal chain tensioner to hold the wheel in place as well as simplify wheel removal
- Rustproofed inside and out before the finish is applied
- Lightweight black magic coating for best anti-corrosion processing
- Integrated headtube is machined to its absolute minimum without sacrificing strength and durability
- Mid BB is machined to its absolute minimum without sacrificing strength or durability
- Slimmed-down director style wishbone is lighter and significantly stronger than previous versions
- Toptube is miter-cut for a precise fit with the seat stays during welding for increase in strength
- Internally double-butted seat tube is used to save weight, but provide strength
- Both chain and seat stays taper to provide a refined and clean look
- Removable, ultra-slim, 2014-T6 aluminum seat clamp included
- Head Tube Angle: 74.5°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.5″
- Chainstay Length: 13.13″ (Slammed)
- BB Height: 11.5″, mid size bb
- Weight: 2080g
- Colour: Vapor Blue
Sunday Broadcaster Frame @ $390
The new broadcaster frame from Sunday is an ultra-modern street tech frame that takes up where the forecaster left off, now with much more progressive geometry. The biggest changes are the 75.5˚ headtube, and the 13 – 13.25” chainstay length. The steeper headtube allows for increased front wheel trick capabilities while the combination of the low 11.5″ BB height and the shortened CS length allows for better spinning and tail whipping possibilities. This is a modern street rider’s dream frame.
- 2-year warranty
- Top Tubes: 20.75″
- Double-butted 1.45″ diameter downtube with proven wave shaping to fight denting
- Removable brake mounts provide a clean look when removed
- Hollow 8mm wide dropouts over solid 5mm dropout, but over twice as strong
- Toptube is miter-cut for a precise fit with the seat stays during welding for increase in strength
- Internally double-butted seat tube is used to save weight, but provide strength
- Both chain and seat stays taper to provide a refined and clean look
- Removable, ultra-slim, 2014-T6 aluminum seat clamp included
- Head Tube Angle: 75.5°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.3″
- Chainstay Length: 13″ (Slammed)
- BB Height: 11.5″, mid size bb
- Weight: 2300g
- Colour: Midnight Blue
Wethepeople Warrior V4 Frame @ $460
The Wethepeople warrior frame was the first of its kind to involve invest casting and even now this frame is at the top of its game it’s actually hard to think how it can be further improve. The warrior frame is a split signature frame developed by Wethepeople and two of the best street riders in the world, Mike Brennan from NYC and Max Gaertig from Bonn Germany. Both riders assisted in the progress and design of the frame, using their sustained knowledge of street riding and geometrical request.
- Lifetime warranty
- Top Tubes: 20.75″
- Butted Japanese seamless 4130 crmo tubing
- Cnc machined and heat-treated bottom bracket
- Cnc machined and heat-treated headtube
- Investment casted 7mm heat-treated dropout
- Investment cast bridges, and seat clamp
- Invest cast Wethepeople slim seat clamp included
- Cnc’d headtube design
- Butted tapered downtube 34mm to 38mm
- Butted top tube with integrated threads for cable guide
- Head Tube Angle: 75°
- Seat Tube Angle: 70.5°
- Seat Tube Height: 8.25″
- Chainstay Length: 13.21″
- BB Height: 11.75″, mid size bb
- Weight: 2280g
- Colour: Raw
Fly Trueno Frame @ $400
The Fly trueno frame is Sergio Layos’ signature frame made chromoly featuring an offset thickness integrated headtube drilled for gyro tabs, tapered top and downtubes with integrated downtube gusset, spanish BB shell, integrated seatpost clamp, 17mm straight gauge stays with investment cast seatstay bridge, drilled chainstays for removable brake mounts (sold separately), and investment cast dropouts. A simple designed frame with a mid rear end length, mid stack height, chainstays brakes, trueno seatstays bridge, and s-shape chainstays.
- Top Tube: 20.6″, or 21″
- Taped 34 to 30 mm top tube
- Taped 36 to 32 mm down tube
- Straight 17 mm stays
- New micro integrated 5mm dropouts with angled RCT
- Trueno invest casting seatstays bridge
- Long coned BB & head tube shells
- Horizontal cut seat clamp system
- Offset thickness head tube
- Integrated downtube gusset
- EBS* brake system, and removable gyro tabs
- Integrated Fly seat clamp
- Head Tube Angle: 75°
- Seat Tube Angle: 71°
- Chainstay Length: 13.4″
- Seat Tube Height: 8.4″
- BB Height: 11.75″, spanish size bb
- Weight: 1940g
- Colour: Black
Fly Tierra V5 Frame @ $420
The Fly tierra v5 frame is the 5th version of Kevin Porter’s classic quick and fun frame with low seat stack height, offset seat tube and short backend made from 100% chromoly with an offset thickness integrated headtube drilled for gyro tabs, tapered top and downtubes with integrated downtube gusset, spanish BB shell, integrated seatpost clamp, straight gauge 19mm stays with investment cast bridges, seatstay located easy brake system (EBS) removable brake mounts, and 1-pc investment cast dropouts with integrated chain tensioners. Seattube is set back 0.4″ to provide additional front end room without needing a larger frame.
- Top Tube: 21″
- Taped 34 to 30 mm top tube
- Taped 36 to 34 mm down tube
- Straight 19 mm stays
- Integrated tierra 5mm dropouts with integrated chain tensioners
- Invest casting tierra stays bridges
- Full rounded BB & head tube shells
- Horizontal cut seat clamp system
- Offset thickness head tube
- Integrated downtube gusset
- EBS* brake system, and removable gyro tabs
- Integrated Fly seat clamp
- Head Tube Angle: 75°
- Seat Tube Angle: 71° w/ 0.4″ offset
- Chainstay Length: 13.2″
- Seat Tube Height: 7.8″
- BB Height: 11.75″, spanish size bb
- Weight: 2000g
- Colour: Black
Fit VH3 Frame @ $520 (Made in USA)
The Fit Van Homan frame is Van Homan’s signature frame made in the USA from a butted true temper supertherm tube set featuring an integrated headtube drilled for gyro tabs, downtube gusset, CNC machined mid BB shell, integrated seat post clamp, tapered seat and chainstays, tubular stay braces, seatstay located removable U-brake mounts and 5mm thick dropouts.
- Top Tubes: 20.5″
- Butted true temper supertherm tubeset
- Engraved key logo head tube
- Straight gauge tapered double bend chain stay
- Straight gauge tapered seat stay
- Integrated headtube drilled for gyro tabs
- Straight gauge tapered seat & chain stays
- Low profile chain stay wishbone
- Reinforced head tube & mid bb vents
- Seatstay located removable u-brake mounts
- Micro 4Q baked 5mm thick dropouts
- Head Tube Angle: 74.5°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.5″
- Chainstay Length: 13.65″
- BB Height: 11.6″, mid size bb
- Weight: 2100g
- Colour: Trans Teal
Fit TD350 Frame @ $520 (Made in USA)
The Fit TD350 frame is the Tom Dugan signature model made in the USA from a super-therm tubeset featuring an integrated headtube with reinforced vent holes, double-butted toptube and straight gauge downtube with external gussets for strength, mid BB shell with reinforced vent holes, tapered seat tube, integrated seat clamp, tapered chainstays with low profile wishbone, tapered seatstays with removable u-brake mounts and 4Q baked heat-treated dropouts.
- Top Tubes: 20.75″
- Double gusset with embossed script logo
- Engraved TD350F head tube
- Investment cast seat clamp
- Butted top tube
- Straight gauge down tube
- Tapered seat tube
- Straight gauge tapered seat & chain stays
- Low profile chain stay wishbone
- Reinforced head tube & mid bb vents
- Seatstay located removable u-brake mounts
- Micro 4Q baked 5mm thick dropouts
- Extended dropouts contact area with stays to increase stiffness
- Head Tube Angle: 74.5°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.5″
- Chainstay Length: 13.6″ (Slammed)
- BB Height: 11.75″, mid size bb
- Weight: 2080g
- Colour: Black
Fit Marv Frame @ $420
New signature frame for UK street legend, Marv from Fitbikeco. The Marv frame features the same great build quality we have come to expect from fit with a double head tube gusset up front to keep things sturdy. The Marv frame features a steep head tube angle, short back end and classic stand-over height to make this frame super responsive yet stable on the streets.
- Top Tubes: 20.75″
- Double gusset with script logo embossing
- Straight gauge top & down tube
- Internally butted seat tube
- Double bend chain stays
- Straight gauge tapered stays
- 2.3″ tire clearance even when slammed
- Extended contact area with stays to increase stiffness
- 5mm thick, 4Q baked dropouts with larger contact area to increase stiffness
- Dropouts shape ideal for 34mm and larger peg
- Head Tube Angle: 75.5°
- Seat Tube Angle: 71°
- Seat Tube Height: 8.9″
- Chainstay Length: 13.1″ (Slammed)
- BB Height: 11.7″, mid size bb
- Weight: 2200g
- Colour: Black, or Clear Coated Raw
Subrosa Villicus V2 Frame @ $430
The Subrosa villicus v2 frame is the Hoang Tran signature model made from 4130 sanko chromoly featuring a heat-treated integrated headtube drilled for gyro tabs, double-butted top, and downtube with external downtube gusset, butted seattube with integrated seat clamp, heat-treated mid BB shell, double-butted seatstays with removable u-brake mounts, investment cast wishbone chainstay junction, and 4mm thick heat-treated dropouts.
- Top Tube: 21″
- Hoang Tran signature model
- 100% 4130 Sanko chromoly, double butted top tube, down tube, seat stays
- Integrated, CNC machined, heat treated and drilled for gyro tabs head tube
- Internally butted seat tube
- Integrated seat clamp w/ replaceable nut and bolt
- T5 deathproof heat treated, specifically designed to not hang up during grinds BB shell
- Low profile removable brake mounts
- Custom manufactured wishbone
- 4mm thick heat treated dropout
- Head Tube Angle: 75°
- Seat Tube Angle: 69°
- Chainstay Length: 13.5″ (Slammed)
- Seat Tube Height: 8.0″
- BB Height: 11.6″, Mid size bb
- Weight: 2080g
- Colour: Black
Fit S4 Frame @ $560 (Made in USA)
The latest installment of Mike Aitken’s new American made signature frame from Fit, the S4. Mike wanted the S4 to be as simple and classic looking as possible while using every new development in materials and workmanship available to improve on the S3.5. Fit have been working on new material for a Down Tube for the last six months so once that was finished and tested they were ready to go. The end result is a clean, classic frame that’s strong and still less than 5 pounds. The S4 builds on the S3.5 with the addition of a new dent resistant downtube, a completely re-designed headtube and mid BB as well as tapered and butted toptube, single bend stays and curved bridges for better rear tyre clearance, and a new rounded seat stay cut for better peg fit.
- Top Tubes: 21″
- S4 butted and tapered top tube
- S4 stronger and more dent resistant down tube
- S4 head tube (completely new design inside and out)
- Single bend Chain stays and curved bridges for maximum tire clearance
- Dropout with a round seat stay cut for a cleaner peg fit
- Head Tube Angle: 75°
- Seat Tube Angle: 71°
- Chainstay Length: 13.4″
- BB Height: 11.6″, mid size bb
- Weight: 2120g
- Colour: Black
Wethepeople A2B Frame @ $300
From A to B, the transformation of a simple idea about being on your bike to riding anything and everything. Ashley Charles put his riding experience into a signature frame that mirrors his understated riding style, and just flows. Made from 4130 Magma heat-treated chromoly with an integrated headtube, double-butted toptube, offset butted downtube, single-butted seattube, integrated seat clamp, 1-pc forged seatstay brace, 6mm thick, invest cast hollow dropouts, wishbone rear end and an externally machined mid BB shell.
- Toptube: 20.85″
- 100% magma heat-treated 4130 crmo tubing
- Integrated headset, with replaceable gyro tabs
- Improved removable brake pivots and hardware
- Increased butting thickness at SS/CS junctions
- Invest casted hollow seatstay bridge
- Investment casted, 6mm hollow, heat treated 4130 crmo dropouts
- Built-in seat clamp
- Head Tube Angle: 75°
- Seat Tube Angle: 71.5°
- Chainstay Length: 13.25″ (Slammed)
- Seat Tube Height: 7.8″
- BB Height: 11.8″, mid bb
- Weight: 2160g
- Colour: Black, or White
jialong84 said
Possible but you can only collect your frame upon full payment.
D said
Cult OS V3 Frame black available?
jialong84 said
Only left 20.75, chrome.
WIFI BUYER said
Do you sell Fit Wifi ?
jialong84 said
Out of stock. So sorry…
Syazwan said
Which toptube length do you recommend for a guy of medium build and height of 1.7m?
jialong84 said
You should try to go for 20.5″ top tube. 🙂
mark perez said
hey jialong do you have a fiend morrow frame in gray?
jialong84 said
Nope, only available in black.
Wyzah said
Jialong, is there still stock for CULT BUTTER black?
jialong84 said
Should have one last piece in 20.65 black.
David said
Which outlet is it at? Can I have your mobile number it’s more convenient thanks 😀
jialong84 said
Sin ming outlet. My mobile number is 81188529.
Deeno said
Hi what TT and CS would you recommend a 170cm guy to get?
jialong84 said
20.5″ tt, and short chainstay… 🙂
theo said
Hi sorry to repeat but just wanna check what TT and CS would you recommend a 174cm guy to get?
jialong84 said
20.5-20.75. CS is personal preference. Some like traditional length, and some prefer shorter chainstay.
mark said
are you guys selling a subrosa noster frame?
jialong84 said
If you are keen, do drop by here at our sin ming outlet to make a downpayment. We are expecting an order to come in soon but we didn’t order this frame.
mark said
hope you guys sell alex kennedy frame from cult?
jialong84 said
Not yet available on the market. Probably early next year before this frame will be release…
Mark said
Fiend embryo frame still available in 21 and black?
jialong84 said
Fiend embryo 21 sold out. What is your height? If you are not more than 185cm you might want to consider taking 20.75 toptube frame
gmae said
Do you have cult trf frame in stock?
jialong84 said
Cult we have ak, hawk, butter. If you like you longer chainstay you can consider cult hawk frame
Mark said
Cult sos frame still available in 20.75